VPN Access

The VPN (Virtual Private Network) enables you to operate as if your remote device was directly connected to the UTMB network. UTMB's VPN will create an encrypted connection between your remote device and a server inside the UTMB network. You might use your home computer, a UTMB-issued laptop, or a mobile device.

During the time you are connected, the VPN will provide your computer with a UTMB IP address. This will enable access to applications and services which are available only within the UTMB network.

For example, a VPN connection will allow you to:

• Connect to your UTMB workstation from a non-UTMB computer using Microsoft Remote Desktop, and use it as if you were physically at your desk. All applications that you run at work should be available remotely.  
• Access and use resources like web sites or web-based applications on the UTMB intranet, departmental, or personal file shares, printers, etc. from a non-UTMB computer.

Important: Before attempting to connect remotely, contact the IS ServiceDesk at (409) 772-5200 and verify that your UTMB computer is configured to allow remote access and that you know its machine name or network address.

Your Trusted Requestor must make a request in ITIM, on your behalf. The good news is that access is auto-provisioned, meaning the request is approved and granted almost immediately.

The install is fairly automated, but it does require some pointing, clicking and typing on your part.

Fortunately, no. You just need to double-click the VPN application icon in the System Tray, select Connect, then authorize the VPN connection using Duo. You should then be able to reach resources on the UTMB network. 

Check the set-up instructions again. It's likely that you just need to double-click the VPN application icon and select Connect, then authorize the VPN connection using Duo. You should now be able to reach resources on the UTMB network. 

Yes. However, the next time you connect to https://utmbacvpn.utmb.edu it will have to be re-installed. 

The VPN is encrypted by default, and it's a point-to-point connection—if you are able to access an internal UTMB system, then your connection is both encrypted and secure. 

In order to assure a secure connection, the VPN will not allow a connected computer to share files, printers, or connections with other devices on its home network at the same time it is connected to UTMB's network. The sharing functions are only disabled while the PC is connected to UTMB. 

Nothing at all. In order to assure a secure connection the VPN will not allow a computer to share files, printers, or connect with another network at the same time it is connected to UTMB. Sharing is disabled only while the PC is connected to UTMB. To gain access to your networked home printer or other resources, or connect to another network, double-click on the VPN application icon and select Disconnect. 

No, sorry. You may perceive a slight improvement due to added data compression, but the VPN operates no faster than the speed of your home Internet connection (or wherever you are connecting from). 

Possibly. The VPN provides the access needed to to map UTMB drives, access files, and run UTMB applications. It does not set up these resources for you, however. 

We strongly suggest you always run a virus and malware protection program on your home computer. UTMB provides protection software on all UTMB-issued computers. 

No, you will need a different login script—please contact the IS ServiceDesk at (409) 772-5200 for assistance. 

Yes, the VPN supports mapping drives using either server names or IP numbers. 

Yes, there is a 30-minute inactivity timer and a 10-hour session limit that will disconnect your computer from the VPN. You'll be asked to re-authenticate when you attempt to reconnect to VPN. 

It's prudent to close any open applications a minute or so before disconnecting the VPN client. In Windows operating systems, some applications do not write data right away. If you disconnect your VPN immediately after exiting such a program (Outlook, for example), data may be lost. 

Windows

IMPORTANT: Your VPN connection must be established for these drive mappings to successfully connect.

1. Right click on my network places and select Map Network Drive
2. Chose a drive letter
3. Put in the path to the share you are trying to map: \\Server\Share; Example \\utmbf5\jdoe$ or \\utmbf2\files.
4. Make sure the Reconnect at Logon box is checked.
5. Under the Reconnect at Logon check box, there is a sentence that says “Connect using a different user name.” Click on the portion of the sentence that is underlined (different user name).
6. A Connect As window appears.
7. In the username field, enter your UTMB credentials like this: utmb-users-m\username
8. In the password field, put in your UTMB password.
9. Select OK and Finish. Your drive mapping should establish.
   
10. Be sure and Disconnect from the VPN when your session is finished.
    
11. The next time you log on to your machine, you may see a notification that the workstation cannot reconnect to the drive mapping. Just select OK.
12. You’ll get a pop-up for each VPN drive mapping you created. Select OK for each one.
13. The net time you Connect to VPN and try to access any of your drive mappings, you will be prompted to enter your UTMB credentials.
14. The drive mapping will reconnect once your UTMB credentials are accepted and you have approved the Duo notification.